TURNTABLE
BELTS (HOME) ORIGINAL
PHONO CARTRIDGES
Audio
Technica
Bang
& Olufsen
Grado
Ortofon
Shure
ORIGINAL STYLI (Needles)
REPLACEMENT
CARTRIDGES &
STYLI
STYLI
(Needles) FOR JUKEBOXES
PHONO
ESSENTIALS
PHONO
PREAMPS
Elixir of Music Rx3
Graham
Slee (GSP)
Gram Amp 2SE
Elevator
Era Gold Mk V
Jazz Club
GSP
Audio Dealers
TURNTABLES
Audio-Technica
AT-PL50
AT-PL120
AT-PL120 Improved
Music Hall
MMF-2.1
MMF-5
MMF-7
Sota
Moonbeam
SPECIAL
OFFERS
TERMS
& CONDITIONS
HOW TO ORDER
HOW
TO INSTALL
TURNTABLE BELT
Online
shopping now available at www.lpgear.com
Online shopping now available at www.lptunes.com
|
|
ACOUSTIC RESEARCH (AR) TURNTABLE BELTS
Acoustic Research pioneered the three-point suspension turntable and
created many classic models still enjoyed today. The belts employed in these
prized turntables are different in terms of length, width and thickness.
Generic belts won't fit as so many frustrated owners have found. So that you can
continue to enjoy these turntables, Elex Atelier ordered the manufacture of
belts specifically for AR turntables. We have fresh new stock available here while supplies last.
To ensure that you always have a working belt for your turntable, we
recommend that you order two and and keep the other as backup.
As a premium belt and phono specialist, we can supply replacements
for ALMOST ANY BRAND AND MODEL turntable. Since 1995, we have been serving the
record-playing community via the Internet. We have satisfied customers in
North America and in many parts of Asia, Australia, and the European
Community. Detailed below is a small sample of belts for
popular brands. If your turntable is not listed below, see our belt
matching information
at the end of this page. Prices are quoted in US dollars, and do not include tax,
shipping, and handling. Ordering information is provided below.
| ACOUSTIC RESEARCH
(AR) |
US$ Price |
|
| AR-11 turntable belt replacement |
$19.95 |
|
| AR EB-101 turntable belt
replacement |
$19.95 |
|
|
AR ES-1 turntable belt replacement |
$19.95 |
|
| AR ETL-1
turntable belt replacement |
$19.95 |
|
| AR Legend
turntable belt replacement |
$19.95 |
|
| AR TA turntable belt replacement |
$19.95 |
|
| AR Xa turntable belt replacement |
$19.95 |
|
|
Starter Belt (small belt) |
$12.90 |
|
| AR Xb-91 turntable
belt replacement |
$19.95 |
|
|
Starter Belt (small belt) |
$12.90 |
|
| AR-Xb
turntable belt replacement |
$19.95 |
|
| AR-Xb-77
turntable belt replacement |
$19.95 |
|
| AR-Xb-91
turntable belt replacement |
$19.95 |
|
| AR-Xdx
turntable belt replacement |
$19.95 |
|
| AR-Xe
turntable belt replacement |
$19.95 |
|
| The
AR Turntable belt
replacement |
$19.95 |
|
|
|
|
| Note:
We recommend that you purchase two to three belts and keep the spares
as backup. We do not charge additional S&H for the backup belts. |
|
How to Order
When ordering, please include the brand, model number, quantity, and price for each item
along with your name, physical address, and e-mail address. For US orders, the shipping
and handling charge (S&H) is $5.90 (we'll bill you for the additional if required but for most
instances, this should suffice). Shipping time will vary though the typical turnaround time is 7 days.
For Canada and Mexico, S&H is
US$9.90. For all other foreign countries, S&H is US$10.90. Shipping time will vary though the typical turnaround time is 7 days.
We accept PayPal, check, money order, and cash payment
in US$ funds along with an order. For international orders, to save you time and bank fees
we recommend payment via
PayPal.
Our receiving address is provided below.
Free Belt Matching
For your convenience, Elex Atelier offers a free belt matching service that saves
you both time and money. If your turntable is not listed above, it is best to send your old belt to us, if this is
not shredded. Otherwise, we will need your belt's type (flat, round or square) and
measurements specifically its length and width in inches. To measure the belt's dimensions, follow the instructions below.
- If you have the turntable belt:
· Pinch both ends of the belt.
· Measure its length in inches and multiply by two (2x).
· If the turntable uses a Flat belt, measure its width (usually 0.187").
· If the turntable uses a Round or Square belt, measure its thickness.
· Please include the make and model of the turntable with the belt's measurements.
- If you do not have the turntable belt:
· Use a piece of string to tightly follow the belt's path.
· Measure the length of the string in inches.
· Measure the distance between the rims of the motor pulley (usually about 0.200").
· Please include the make and model of the turntable with the belt's measurements.
We'll do our best to find a replacement for you.
Send your orders to:
ELEX ATELIER™
PO Box 96244, Las Vegas, NV 89193
USA
e-mail: LpBelts@yahoo.com
e-mail: elex@elexatelier.com
The entire website is protected by copyright. All rights reserved. |
